Advanced users • Re: sfdisk fails to add MBR partition table to NFS-mounted...
Try changing to a swap file and a bigger swap size. I always got for two times RAM (= 1GB on a Zero 2W) for swap. Worst case it goes into swap hell if running on a SD card but its better than a crash...
View ArticleBeginners • USB CD/DVD some times show up...
I try to rip my music CD's but the CD-reader some times show upwhen I restart the system and I can rip one CD and then the CD-reader disappear from the system, but most of the time it do notshow up...
View ArticleCompute Module • Re: Solution found for rpiboot stuck at "Waiting for...
I am experiencing a similar issue though using different hardware. I was able to get the Compute Module 4 IO board to let up a Red LED to indicate the board is powered on if I make sure that the...
View ArticleRaspberry Pi OS • How I finally removed redundant icons from desktop
Round-about success in removing redundant icons from desktop, but probably not the prescribed manner of doing it.First, searched entire drive for .desktop files. Found the redundant ones in several...
View ArticleOfficial Display • Re: New desktop OS and 7" v2 display issue
Working fine here with PiOS Trixie fully updated. Are you saying that the screen worked okay until you updated the OS and now doesn't, no other changes of Pi etc?Statistics: Posted by RGJ-PI — Fri Sep...
View ArticleTroubleshooting • Re: [SOLVED] Problem with gpiozero RotaryEncoder on Pi4
It would appear its decided there's a clash on gpio20 with the Pi DAC pro (I2S SDIN) but was fine before...I moved to gpio 26 which works fine, but may clash with the InnoMaker 25w amp hat if you use...
View ArticleNetworking and servers • Re: Server processing between two networks.
I'm trying to set up a network interface as in accessing the pi's eth0 or eth1 or wlan0 programmaticly. I want to listen for an input or push an output to that interface withing the program. Is this...
View ArticleOfficial Display • New desktop OS and 7" v2 display issue
Anyone got this to work ? I can't even get a display, part works on hdmi with 7" display attached but not usable, no task bar...Statistics: Posted by gordon77 — Fri Sep 25, 2026 12:33 pm
View ArticleTroubleshooting • Re: Missing "Hardware" entry in /proc/cpuinfo on...
The hardware reported was always the same in 32 bit OS (and nonsense as your reported example is obviously wrong for a Pi3+).Presumably this was removed as it is meaningless.It is unclear what OS you...
View ArticleClik here to view.
Troubleshooting • Re: Raspberry Pi Zero 2H - solar setup failed
Hi, thank you for the suggestions, and yes there is something about the serial communication which I did not say right. In the scenario that the the EPS32 boots up/wake up from deep sleep and the Rpi...
View ArticleTroubleshooting • Pi Zero 2 W only boots when I plug in the USB cable while...
I have a Raspberry Pi Zero 2 W running headless with Raspberry Pi OS Lite (64-bit). I reflashed the microSD card, and Raspberry Pi Imager completed both writing and verification successfully. Wi‑Fi...
View ArticleTroubleshooting • Re: RB Pi 5 8gb solid red led!
Sounds dead. Cause is odd though. I wonder if you monitor is leaking current on to the HDMI connector.Statistics: Posted by jamesh — Thu Sep 24, 2026 3:16 pm
View ArticleTroubleshooting • Re: Boot issue with PI5 because of SMD components
There seems to be a lot of posts like this, especially with the Pi4 and Pi5. Has RPL ever considered adding a conformal coating to its boards ? It only costs a few cents per board once you buy the...
View ArticleTroubleshooting • RB Pi 5 8gb solid red led!
I have an 8GB Raspberry Pi 5. I was using it normally when, I connected and disconnected the Micro HDMI cable from the monitor because it wasn't sending a signal, all of a sudden, it shut down and...
View ArticleRaspberry Pi OS • Re: How to get rid of redundant icons on the new Trixie Dock
Thank you, but didn't work. Deleted and rebooted. No change. Redundant app icons not eliminated. Menus not in .config any longer.Yet, dock is identical to that of before deleting the menus...
View ArticleRaspberry Pi OS • [SUCCESS] apt update... Raspbian "Buster", how ?
As hoped and expected, I was able finally to download and install to the old Buster system the gpg keys needed by the apt suite of tools, using following 2 Bash commands : Code: pi@raspberrypi:~ $...
View ArticleC/C++ • Re: pico-kvstore newb
More info ...Trying to build host/kvstore-utils throws up this:Using PICO_EXAMPLES_PATH from environment ('/home/mick/pico/pico-examples')CMake Warning (dev) at...
View ArticleClik here to view.
Advanced users • How to virtualize a 4B+ using QEMU on Windows 11 with MYsys2
Folks,I am stuck and hoping to find some advanced help on QEMU emulation of a Raspberry PI 4B+ on a windows host using Mys2. I am trying to set up a cluster of virtualized images to test custom...
View ArticleTroubleshooting • Re: Low Power Warnings
How do i request one?Usually through the shop you bought it.Statistics: Posted by stubright — Thu Sep 24, 2026 12:44 pm
View ArticleMicroPython • Re: Code debugging from VS Code is working
Thanks @hippy I am glad it has worked for you, and we have also fixed the bad link.Statistics: Posted by gusissa — Wed Sep 23, 2026 4:21 pm
View Article
