General discussion • Re: Application windows in rpiOS Bookworm
Use command line raspi-config to change to Xwindows/openboxWhy can't wayfire do the same behavior? Is there any config in wayfire desktop manager to NOT dump application windows at the same...
View ArticleTroubleshooting • Re: Raspberrypi 5 freeze randomly and verry often
I seriously think there should be a "disclaimer" on RPI boxes stating that it can not really replace a fully fledged desktop/laptop computer. As this thing gets more popular, some people might think...
View ArticleClik here to view.
Raspberry Pi Connect • Re: Pi Connect works but get repeated wayvnc error...
I have SAME problem on my ALL 3x Raspberry PI 3/400/5 my /var/log/ is like 0.5GB per month coz of this error message?! I'm running labwc even on RPI 3 its working fine, i can do screen-sharing too!...
View ArticleCamera board • Re: Extended Connection - Arducam 64MP to Raspberry Pi5
Hi,FYI.https://www.uctronics.com/15-meter-cabl ... n-kit.htmlStatistics: Posted by DaPiLad — Wed Oct 23, 2024 7:27 am
View ArticleTroubleshooting • Re: Help on duplicating Pi5 SD card
Yeah clonepi can clone your actual boot drive, regardless of what medium it is. It is actually quite a nifty piece of program that it can clone your boot and root partition to any drive you wish, even...
View ArticleGeneral • Re: Issue with I2S Data Transfer using PIO and DMA on RP2040 - Data...
I don't see any alarm in FDEBUG. Good clue!Regarding chain of channels, I had a small inconvenient, I need to restart the buffer address each time that I finish one channel, looks weird to me, I...
View ArticleGeneral discussion • Re: New Raspberry Pi Products
What's the benefit of having a dedicated AI HAT+ (two different models for beeing precise) compared to M.2 HAT+ with accelerator mounted?Statistics: Posted by aBUGSworstnightmare — Thu Oct 24, 2024...
View ArticleAdvanced users • Re: NUMA Testing
This is pi4? Have you updated firmware (start4.elf).vcgencmd versionIt should insert numa=fake=2 automatically.Yes it's a pi4, with up to date firmware & start4.elfCode:...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: TomTom Display datasheet link
Easy to connect to RPI DPI interface, but as it consumes all GPIO the question remains if it's worth the effort for such a low resolutuon display.A 4in SPI gives you 480x320pixels at far less effort...
View ArticleAI Camera - IMX500 • Re: Re AI Camera (RP2040) firmware update
Is it absolutely necessary to upgrade the firmware or will the camera still work if you don't ?It will still work exactly the same with the older firmware except on Pi 4 and lower you will have slower...
View ArticleGraphics programming • Re: rPi5 vs CM4 hardware difference affect display
All the DSI changes are in the latest kernel in apt, however you're not running that. The latest is 6.6.51.With the newest version of the kernel, my screen was able to display, although not perfectly....
View ArticleTroubleshooting • Re: RPi5 boot issue - 'Fatal firmware error'
So which 'brand new PD charger' did you connect? Which HAT do you use - official or third party?A third party one.Disconnect the HAT, remove uSD, power up the Pi and post a picture of the boot...
View ArticleMicroPython • Re: Import could not be resolved in VSCode lib folder
When I'm coding I want to know if the errors are seeing are real errors that need to be fixed and not just fake errors, that can be ignored. The problem isn't with VSCode it's with the Official...
View ArticleSDK • Re: GPIO pin handling on the Pico
The behavior of the pull-ups was also interesting. With pins set to inputs and pullups on, and then switching from inputs to outputs, the output pins are always initially set to zero, then switched to...
View ArticleGeneral • Re: Compatibily uf2 files
Turns out the RX pin on GPIO21 isn't an issue. The QT Py exposes TX and RX so of course both can be used on the same UART; UART1, GPIO20=TX, GPIO5=RX - Which is how 'stdin/stdout' does it as shown...
View ArticleAI Camera - IMX500 • Re: Step Quantization and Compression
The process I'm going through to produce the model is:1. Collect Images2. Annotate Images (using labelimg)3. Split Data - into train and val for training and testing the model4. Train - run 50 or so...
View ArticleBeginners • Re: Is there a simple and foolproof way to upgrade the OS?
So, instead of upgrading I will be looking for alternatives to the Pi.I won't be reading this thread anymore, but thanks to everyone who contributed, including those who wrote things that I needed to...
View ArticleTroubleshooting • Re: Raspberry Pi 5, Can Alignment Faults Be Turned Off?
Adding some page tables and basic MMU setup fixed the problem. I mostly followed these two guides and the Arm Reference Manual.1. https://dannasman.github.io/aarch64-mmu2....
View ArticleRaspberry Pi OS • Re: How to determine when a system was installed?
It seems strange to me that there is no direct answer to this question; there seem to be a lot of ad hoc approximations.The OS doesn't know the date until after it is installed and connects to NTP.I...
View ArticleGeneral discussion • Re: Pi NAS - SMB vs OMV
No I would say, it looks to me that you are experienced enough handling a Pi4 and various software. You can try OMV, it offers lot with nice interface, but I found that it lacked various key features...
View Article